310295
3
WARNINGS
MOVING PARTS HAZARD
Moving parts, such as the ram plate/pump inlet can pinch fingers.
Do not operate the equipment with the guard removed.
Keep clear of all moving parts when starting or operating the equipment.
Keep hands and fingers away from the priming piston during operation and whenever the pump is
charged with air.
Keep clear of the ram plate, pump fluid inlet, and lip of the fluid container when raising or lowering
the ram.
Before checking or servicing the ram or pump, follow the Pressure Relief Procedure in the ram or
pump manual.
TOXIC FLUID HAZARD
Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin,
inhaled, or swallowed.
Know the specific hazards of the fluid you are using.
Store hazardous fluid in an approved container. Dispose of hazardous fluid according to all local,
state and national guidelines.
Always wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and
solvent manufacturer.
Avoid exposure to heated material fumes.
Provide adequate ventilation.
FIRE, EXPLOSION AND ELECTRIC SHOCK HAZARD
Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition and
result in fire, explosion, or electricshock and other serious injury.
Ground the equipment, the object being dispensed, and all other electrically conductive objects in
the dispense area. Proper grounding dissipates static electricity generated in the equipment. See
Ground the System in your system manual.
Do not use this equipment with flammable liquids.
Keep the dispense area free of debris, including solvent, rags, and gasoline.
If there is any static sparking while using the equipment, stop dispensing immediately. Identify
and correct the problem.
Make sure all electrical work is performed by a qualified electrician only.
Make sure all electrical equipment is installed and operated in compliance with applicable codes.
Make sure power is disconnected when servicing and repairing equipment.
Have any checks, installation, or service to electrical equipment performed by a qualified electrician
only.
Summary of Contents for C59519
Page 9: ...310295 9 Notes...
