Warning
333119D
5
SKIN INJECTION HAZARD
High-pressure spray is able to inject toxins into the body and cause serious bodily injury. In the event that
injection occurs,
get immediate surgical treatment.
•
Do not aim the gun at, or spray any person or animal.
•
Keep hands and other body parts away from the discharge. For example, do not try to stop leaks with
any part of the body.
•
Always use the nozzle tip guard. Do not spray without nozzle tip guard in place.
•
Use Graco nozzle tips.
•
Use caution when cleaning and changing nozzle tips. In the case where the nozzle tip clogs while
spraying, follow the
Pressure Relief Procedure
for turning off the unit and relieving the pressure
before removing the nozzle tip to clean.
•
Do not leave the unit energized or under pressure while unattended. When the unit is not in use, turn
off the unit and follow the
Pressure Relief Procedure
for turning off the unit.
•
Check hoses and parts for signs of damage. Replace any damaged hoses or parts.
•
This system is capable of producing 3300 psi (227 bar, 22.7 MPa) psi. Use Graco replacement parts
or accessories that are rated a minimum of 3300 psi (227 bar, 22.7 MPa) psi.
•
Always engage the trigger lock when not spraying. Verify the trigger lock is functioning properly.
•
Verify that all connections are secure before operating the unit.
•
Know how to stop the unit and bleed pressure quickly. Be thoroughly familiar with the controls.
EQUIPMENT MISUSE HAZARD
Misuse can cause death or serious injury.
•
Always wear appropriate gloves, eye protection, and a respirator or mask when painting.
•
Do not operate or spray near children. Keep children away from equipment at all times.
•
Do not overreach or stand on an unstable support. Keep effective footing and balance at all times.
•
Stay alert and watch what you are doing.
•
Do not leave the unit energized or under pressure while unattended. When the unit is not in use, turn
off the unit and follow the
Pressure Relief Procedure
for turning off the unit.
•
Do not operate the unit when fatigued or under the influence of drugs or alcohol.
•
Do not kink or over-bend the hose.
•
Do not expose the hose to temperatures or to pressures in excess of those specified by Graco.
•
Do not use the hose as a strength member to pull or lift the equipment.
•
Do not spray with a hose shorter than 25 feet.
•
Do not alter or modify equipment. Alterations or modifications may void agency approvals and create
safety hazards.
•
Make sure all equipment is rated and approved for the environment in which you are using it.
WARNING
WARNING
WARNING
WARNING
Summary of Contents for FinishPro II 295
