Startup
16
334730F
8.
Move gun to paint pail and trigger for 20
seconds. Release trigger and allow
sprayer to build pressure. Engage
trigger lock.
9.
Inspect for leaks. If leaks occur, perform
then tighten all fittings and repeat Startup
procedure. If there are no leaks continue
with the next step.
10. Screw tip assembly onto gun and
tighten. See
page 17. For gun assembly instructions,
see separate gun manual.
High-pressure spray is able to inject toxins
into the body and cause serious bodily
injury. Do not stop leaks with hand or rag.
ti25472a
20 s
ti25473a