Graco Junior Maxi, Owner'S Manual

Vehicle belts MUST lay flat against child and MUST not be twisted.
DO NOT

 use shoulder belt loose or positioned under child’s arm.

DO NOT

 position vehicle belt over top of the armrests. It must pass under-

neath the armrests.
Make sure vehicle belt is NOT twisted.
Lap portion of lap/shoulder belt MUST be low and snug on hips, just 

touching thighs.
DO NOT

 allow child to slide down in booster seat. If child will not keep 

vehicle restraint properly positioned, DO NOT use this booster seat. Use a 

different child restraint system.
Vehicle seat headrest must not interfere with booster seat head support.  
The front of booster seat MUST NOT hang over front of vehicle seat.

The back of the booster seat MUST fit tight against the vehicle seat back 
as shown.
Booster Seat Positions

Your booster seat has two positions as shown.

The back of the booster seat MUST fit tight against the vehicle seat back as 
shown in either the first or second position.

DO NOT USE

 booster seat beyond reclined position. 

Securing your Child in Vehicle

Place booster seat firmly against the back of a forward-facing vehicle seat 
equipped with a lap/shoulder belt only.

Have your child sit in booster seat with their back flat against back of 
booster seat. 

Position shoulder belt through the shoulder belt guide shown in 

25

,  

NOT as shown in 

26

.

 Fasten buckle and pull up on the shoulder belt to 

tighten. 

To ensure the correct head support height is obtained, the bottom of the 
headrest MUST be even with the top of child’s shoulders as shown  
in 

27

 and the shoulder belt must be positioned in the red zone as  

shown in 

28

.

16

20

21

16

17

18

19

23

24

22

25

26

27

28