13
14
Please return this product to a local
collection point when the product is at
the end of its life.
The crossed out wheelie bin
symbol indicates the product is
to be recycled.
Parts list
A
Travel Cot
B
Carry Bag
C
Bassinet
D
Mattress
E
Tops Of Stand
F
End Of Leg (Without Wheels)
G
Foot End (vibration switch)
H
Head End (no switch)
I
Mount
J
End Of Leg (With Wheels)
K
Sleeper
L
Pad of Changing Table
M
Hub of Changing Table
N
Support Tube of Changing Table
O
Parent Organizer
P
Hooks
Q
Electronics Module
R
Toys (Styles vary)
To Set Up Travel Cot
See images
1
-
7
1.
Lock the end rails by pulling them up, 2
opposite sides at a time.
2.
Push centre of floor down.
3.
Install mattress, soft side up, and fasten
with straps.
•
To lock or unlock top rails, centre of
floor must be UP.
•
Rails will not lock when centre of floor
is down.
•
If top rails do not lock, centre may be
too low.
To Fold Travel Cot
See images
8
-
13
1.
Remove mattress from the playard.
2.
Pull centre of floor halfway up.
3.
Pull up the end rails and push in the
buttons, 2 opposite sides at a time, to
unlock the rails.
4.
Lower each rail.
5.
Pull the centre of floor all the way up.
•
DO NOT FORCE FOLD!
Travel Cot
See images
14
-
15
Bassinet
See images
16
-
20
Using Electronics Module
See images
21
-
30
•
You must remove the module from the
unit when your child can pull up to a
standing position.
1.
Remove 2 screws from back of
electronics module.
2.
Remove battery door and insert 3-AA
(LR06) batteries (not included). Replace
door and screws.
3.
Attach electronic module to travel cot
as shown.
4.
Lights— Press once to turn top light
on, press twice to turn both lights on,
press three times to turn bottom light
on, and four times to turn lights off.
5.
MUSIC— Each press will start the next
music function in sequence, after the
5th song is selected, the next press will
turn music off.
6.
VOLUME— Press the plus (+) to raise
the volume and the minus (-) to lower
the volume.
7.
NATURE SOUNDS— Each press will
change to the next nature sound. After
the 5th sound is selected, the next
press will turn sound off.
8.
TIMER— Press once to set timer to 5
minutes, Press twice for 10 minutes,
Press 3 times for 15 minutes.
Parent Organizer
See images
31
-
32
•
Always keep objects out of child’s
reach. Remove this accessory when
child is able to pull himself up in the
travel cot.
Changing Table
See images
33
-
39
Sleeper
See images
40
-
52
1.
Use a key or flat head screwdriver to
open battery compartment on bottom
of the foot end hub with switch and
insert 1-D (LR20-1.5V) (not included).
Replace battery compartment door.
2.
To attach sleeper to travel cot, line up
lock logo on sides of sleeper with lock
logo in one of the two attachment
positions. Push sleeper onto travel cot
rails.
•
Bassinet must be attached to travel cot
when using sleeper.
•
Child’s movement can slide sleeper.
Use only on floor, travel cot or stand.
To Secure Child
See images
53
-
55
1.
Attach waist straps to harness buckle
as shown.
2.
To open, press button on buckle to
release the waist straps.
3.
Use slide adjuster at waist for tighter
adjustment.
To Use Vibration Switch
See image
56
•
To use integrated vibration switch, slide
button to left for low speed or right for
high speed.
To incline/recline sleeper
See images
57
-
61
•
CHECK that both sides of the seat back
are latched into the same position and
the seat back is level.
To Remove Sleeper
See images
62
-
63
