24
307-711
TECHNICAL DATA
Power Requirements
120 VAC, 60 Hz, 1 Phase, 15 AMP minimum
. . . . . . . . . . . . . .
Pressure Operating Range
0–3000 psi (0 – 210 bar)
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum Delivery
0.28 GPM (1.1 liter/min)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Cord
No. 16 AWG, 3 wire, 8’6” (2.6 m) long
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inlet Paint Strainer
16 mesh
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid Outlet Nipple
1/4 npsm (m)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weight – without hose and gun
33 lb (14.8 Kg)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions
Height: 20” (508 mm)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Width: 17.5” (444.5 mm)
Depth: 17.5” (444.5 mm)
Wetted Parts
Stainless Steel, Zinc-Plated Steel, Carbide,
. . . . . . . . . . . . . . . . . . . . . . .
Aluminum, Nylon, Delrin
, Monel
Delrin
is a registered trademark of the DuPont Company
THE GRACO WARRANTY AND DISCLAIMERS
WARRANTY
Graco warrants all equipment manufactured by it and bearing its name to be free from defects in material and
workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. As pur-
chaser’s sole remedy for breach of this warranty, Graco will, for a period of twelve months from the date of sale,
repair or replace any part of the equipment proven defective. This warranty applies only when the equipment is
installed, operated and maintained in accordance with Graco’s written recommendations.
This warranty does not cover, and Graco shall not be liable for, any malfunction, damage or wear caused by
faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, acci-
dent, tampering, or substitution of non–Graco component parts. Nor shall Graco be liable for malfunction, dam-
age or wear caused by the incompatibility with Graco equipment of structures, accessories, equipment or mate-
rials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of
structures, accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized
Graco distributor for verification of the claim. If the claimed defect is verified, Graco will repair or replace free of
charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If
inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a
reasonable charge, which charges may include the costs of parts, labor and transportation.
DISCLAIMERS AND LIMITATIONS
THE TERMS OF THIS WARRANTY CONSTITUTE PURCHASER’S SOLE AND EXCLUSIVE REMEDY AND ARE IN LIEU OF ANY OTHER
WARRANTIES (EXPRESS OR IMPLIED), INCLUDING WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PAR-
TICULAR PURPOSE, AND OF ANY NON–CONTRACTUAL LIABILITIES, INCLUDING PRODUCT LIABILITIES, BASED ON NEGLI-
GENCE OR STRICT LIABILITY. EVERY FORM OF LIABILITY FOR DIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS IS
EXPRESSLY EXCLUDED AND DENIED. IN NO CASE SHALL GRACO’S LIABILITY EXCEED THE AMOUNT OF THE PURCHASE PRICE.
ANY ACTION FOR BREACH OF WARRANTY MUST BE BROUGHT WITHIN TWO (2) YEARS OF THE DATE OF SALE.
EQUIPMENT NOT COVERED BY GRACO WARRANTY
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PAR-
TICULAR PURPOSE, WITH RESPECT TO ACCESSORIES, EQUIPMENT, MATERIALS, OR COMPONENTS SOLD BUT NOT MANU-
FACTURED BY GRACO.
These items sold, but not manufactured by Graco (such as electric motor, switches, hose,
etc.) are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable as-
sistance in making any claim for breach of these warranties.
Factory Branches: Atlanta, Chicago, Dallas, Detroit, Los Angeles, Mt. Arlington (N.J.)
Subsidiary and Affiliate Companies: Canada, England, Switzerland, France, Germany, Hong Kong, Japan; Korea
GRACO INC.
P.O. BOX 1441
MINNEAPOLIS, MN
55440–1441
PRINTED IN U.S.A.
307–711 1–85
Revised 10–92
