Setup
14
313221A
Table 2: Electrical Requirements
Model
Required Power Source
Power Cord Connector
120 V, 1 phase, 50/60 Hz,
three 15 ft (4.5 m) power cords,
Heated
Three separate, dedicated
circuits rated at minimum of
15 A each
Three NEMA 5-15T
Table 3: Extension Cord Requirements
Model
Required Wire Size
Up to 50 ft (15
m)
Up to 100 ft (30 m)
Two cord heated models
AWG 14
AWG 12
Cords must be 3-conductor grounded, rated for your
environment.
F
IG
. 5. Use Three Separate Circuits
1
Ensure no other high amp loads are connected
while running Reactor E-10.
To verify separate circuits, plug in Reactor E-10
or a worklight and cycle breakers on and off.
1
2
To avoid electric shock, always unplug all cords
before servicing Reactor E-10.
Heater Power
Motor Power
TI12383a
2
Compressor Power
