Cleanup and Storage
3A8304B
9
4.
Install ProPack Filter and fill ProPack
Tank with warm water.
5.
Flush water through ProPack as follows:
a.
Hold Sprayer Adapter below
ProPack Tank. Point into waste
bucket.
b.
Turn Valve Handle
counter-clockwise to open position.
c.
Allow all water to drain from
ProPack Tank and Hose.
6.
Pour any excess water from ProPack
Tank into waste bucket.
7.
Verify all fluid is drained from Hose. Turn
Valve Handle clockwise to closed
position.
8.
Dispose of the fluid in the waste bucket
according to instructions on the
disinfectant container label and
applicable regulations.
9.
Use a soft cloth moistened with water to
clean and wipe disinfectant from outside
of the ProPack.
Storage
•
Do not allow water to freeze in ProPack
or Hose.
•
Store ProPack in upright position.
•
Store ProPack indoors in a cool, dry
place.
•
Review
Storage
in your sprayer manual
for further instructions.
