Setup
3
Setup
•
Set shop air pressure regulator (not supplied)
according to paint manufacturer’s recommendation.
See maximum pressures on cover.
•
Make sure no air restrictions, such as low-volume
cheater-valves, obstruct the air flow. If an air adjust-
ing valve is desired, use a SHARPE Air Adjusting
Valve 24AAV (part no. 2210), 36AAV-HOV (part no.
3310) or HOV (part no. U04410).
•
Install a shutoff valve (not supplied) downstream of
the air regulator to shut off gun air.
•
Install an inline air filter (not supplied) to clean and
dry the air supply to the gun.
1.
Turn off air supply.
2.
Connect a clean, dry, filtered air supply to gun air
inlet (2).
3.
If this is first time using the equipment, flush the
spray gun.
TOXIC FLUID OR FUMES HAZARD
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or
swallowed.
•
Read MSDSs to know the specific hazards of the fluids you are using.
•
Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.
PERSONAL PROTECTIVE EQUIPMENT
You must wear appropriate protective equipment when operating, servicing, or when in the operating
area of the equipment to help protect you from serious injury, including eye injury, hearing loss,
inhalation of toxic fumes, and burns. This equipment includes but is not limited to:
•
Protective eyewear, and hearing protection.
•
Respirators, protective clothing, and gloves as recommended by the fluid and solvent manufacturer.
WARNING
F
IG
. 1
2
11
7
17
