Troubleshooting
46
3A8108A
Solenoid Manifold Operation
To diagnose a malfunctioning unit, begin with
diagnostics, see
Cycle to Diagnostic Screen #2 to assess what
condition your unit is in.
Reference the table conditions and screens
below to determine the operating condition.
Note, the unit must be running and
pressurized.
Operating Condition #1
Tape application assembly is in cut position.
Carriage is in the raised position, see
Application Assembly Positions
Output ‘1’ = OFF
Output ‘2’ = OFF
Output ‘C’ = OFF
Operating Condition #2
Tape application assembly is in cut position.
Carriage is in the lowered position, see
Application Assembly Positions
Output ‘1’ = OFF
Output ‘2’ = OFF
Output ‘C’ = ON
To help prevent injury from moving parts,
keep clear of carriage when actuating
solenoid outputs. Perform
working on equipment.
Operating
Condition
#
Output '1' Output '2' Output 'C'
Description
#1
Off
Off
Off
Tape application
assembly is in
cut position.
Carriage is in the
raised position
#2
Off
Off
On
Tape application
assembly is in
cut position.
Carriage is in the
lowered position
#3
On
On
On
Tape application
assembly is in
application
position.
Carriage is in the
raised position
#4
On
Off
On
Tape application
assembly is in
secondary
position.
Carriage is in the
raised position
Summary of Contents for TapeLazer HP Automatic
