Reference
26
3A4476E
Cleaning Fluid
Compatibility
Oil- or Water-Based Materials
•
When spraying
water-based
materials,
flush the system thoroughly with water.
•
When spraying
oil-based
materials,
flush the system thoroughly with mineral
spirits or compatible, oil-based flushing
solvent.
•
To spray
water-based
materials
after
spraying oil-based
materials, flush the
system thoroughly with water first. The
water flowing out of drain tube should
be clear and solvent-free
before
you
begin spraying the water-based mate-
rial.
•
To spray
oil-based
materials
after
spraying water-based
materials, flush
the system thoroughly with mineral spir-
its or a compatible oil-based flushing
solvent first. The solvent flowing out of
the drain tube should not contain any
water. When flushing with solvents
always follow
Instructions (Oil-Based materials)
•
To avoid fluid splashing back on your
skin or into your eyes, always aim gun at
inside wall of pail.
Static Grounding
Instructions (Oil-Based
materials)
Always use a metal pail for oil-based
materials requiring flushing with compatible
oil-based flushing solvents when sprayer is
flushed or pressure is relieved.
Follow local code. Use only conductive metal
pails, placed on a grounded surface such as
concrete.
Do not place pail on a non-conductive surface
such as paper or cardboard which interrupts
grounding continuity.
The equipment must be grounded to
reduce the risk of static sparking. A static
spark can cause fumes to ignite or explode.
A good ground provides an escape wire for
the electric current.
Summary of Contents for TC Pro
Page 36: ...Notes 36 3A4476E Notes ...
Page 37: ...Notes 3A4476E 37 Notes ...