Accessorie
s
9
96
9-A Accessories
(on select models)
Harness Covers
Make sure that harness covers do not interfere
with placement of the chest clip at armpit level.
To remove, undo the fastening strips and remove.
When forward-facing, harness covers MUST be
used if the child weighs 25 lb (11 kg) or less.
Infant Body Support
Use only in the rear-facing mode.
Body support must be used if shoulders are below
the lowest harness setting.
Never allow body support to bunch or fold behind
child.
Infant Head Support
Use only in the rear-facing mode. To adjust the
support, pull up until desired height.
To install, thread the head support straps through
the headrest and use the fastening strips to
connect the straps together.
To remove, undo the fastening strips and pull the
straps out of the headrest.
NWL0001148417C True3Fit LX USA ENG R04 (8BZ20).indd 96
NWL0001148417C True3Fit LX USA ENG R04 (8BZ20).indd 96
9/18/20 11:51 AM
9/18/20 11:51 AM