Troubleshooting
3A0705B
19
Spray Pattern Diagnostics
Poor spray results
Tip is partially clogged
See
Unclogging Tip/Guard
Assembly
, page 13.
Tip is not in correct position
Rotate tip to SPRAY position.
Incorrect tip for application of
material.
See
Reversible Tip Selection
Chart,
page 11.
Tip filter is partially clogged
Clean or replace filter. See page 13.
Suction Tube screen is partially
clogged.
Clean or replace Suction Tube. See
page 14.
Fine Finish Optimizer is partially
clogged.
Clean or replace Fine Finish Opti-
mizer. See page 8.
Fine Finish Optimizer is installed
while using an incompatible material.
Make sure compatible material is
being used. See
Reversible Tip
Selection Chart
, page 11.
Tip is worn or damaged
Replace tip. See
Install Tip/Guard
Assembly
, page 11.
Sprayer is worn out.
Replace sprayer.
Paint leaks from sprayer trigger area. Sprayer has reached its maximum
life.
Replace sprayer.
Battery is discharged but charger still
displays green light when battery is
inserted.
Damaged battery.
Replace battery.
Problem
Cause
Solution
Problem
Cause
Solution
Spray pattern is pulsating:
Fine Finish Optimizer is installed while using
an incompatible material.
Operator is moving too fast while spraying.
Make sure material is compatible. See
Reversible Tip Selection Chart
, page 11.
Slow speed of movement.
Spray pattern has tails:
Fine Finish Optimizer is installed while using
an incompatible material.
Fine Finish Optimizer is partially clogged.
Material not compatible with sprayer.
Sprayer is worn out.
Make sure compatible material is being used.
See
Reversible Tip Selection Chart
, page
11.
Clean or replace Fine Finish Optimizer.
See page 8.
Switch material.
Replace sprayer.
Spray pattern has dripping:
Sprayer is moving too slow for material.
Sprayer is too close to target surface.
Holding trigger while changing spray
direction.
Incorrect tip for application of
material.
Tip is worn or damaged.
Move sprayer faster while spraying.
Move sprayer away from surface (10 in).
Release trigger when changing directions.
See
Reversible Tip Selection Chart,
page
11.
Replace tip. See
Install Tip/Guard Assembly
,
page 11.
ti15524a
ti15526a
ti15522a
Summary of Contents for TrueCoat Plus
Page 23: ...Notes 3A0705B 23 Notes ...