Technical
Technical
Technical Specifications
Specifications
Specifications
Electrostatic
Electrostatic
Electrostatic Air
Air
Air Spray
Spray
Spray Waterborne
Waterborne
Waterborne Guns
Guns
Guns
U.S.
U.S.
U.S.
Metric
Metric
Metric
Maximum Working Fluid Pressure
100 psi
0.7 MPa, 7.0 bar
Maximum Working Air Pressure
100 psi
0.7 MPa, 7.0 bar
Minimum Air Pressure at Gun Inlet
45 psi
0.32 MPa, 3.2 bar
Gun Air Consumption
Required turbine air flow
6 scfm
170 l/min
Range of total air flow under
normal spraying conditions
15–20 scfm
425–565 l/min
Maximum Fluid Operating
Temperature
120°F
48°C
Short Circuit Current Output
125 microamperes
Voltage Output Energy
0.35 J with fluid hose 24M733 installed.
L60T17 and L60T18: 60 kV
L60M17, L60M18, and L60M19: 30–60 kV
Sound Power (measured per ISO
Standard 9216)
at 40 psi: 90.4 dB(A)
at 100 psi: 105.4 dB(A)
at 0.28 MPa, 2.8 bar: 90.4 dB(A)
at 0.7 MPa, 7.0 bar: 105.4 dB(A)
Sound Pressure (measured 1 m
from gun)
at 40 psi: 87.0 dB(A)
at 100 psi: 99.0 dB(A)
at 0.28 MPa, 2.8 bar: 87.0 dB(A)
at 0.7 MPa, 7.0 bar: 99.0 dB(A)
Air Inlet Fitting
1/4 npsm(m) left-hand thread
Fluid Inlet Fitting
Custom inlet for Graco waterborne fluid hose.
Isolation Enclosure Air Inlet Fitting
1/4 npt
Isolation Enclosure Fluid Inlet
Fitting
3/8 in. OD tube fitting
10 mm OD tube fitting
Wetted Parts
Gun: Stainless Steel, PEEK, UHMWPE, Fluoroelastomer, Acetal,
Nylon, Polyethylene, Tungsten Wire
Waterborne Fluid Hose: PTFE
Suction Tube: Polyethylene, Stainless Steel
Triton Pump: See manual 309303.
3A2496H
111