Adjusting Spring Tension
3A0142A
7
Adjusting Spring Tension
Decreasing Spring Tension
1.
If it is not already loose, loosen (A) 3-5 turns. Do not
remove (A)! (F
. 15).
2.
If they are not already loose, loosen (B) 3-5 turns.
Do not remove (B) yet (F
. 16).
3.
Insert ratchet (C). Then remove screws (B) (F
17).
4.
Turn ratchet (C) one full turn counter-clockwise (F
18).
IMPACT HAZARD
The spring is always under great tension and could be propelled or uncoil with enough force to cause serious
injury.
•
The hose reel spring is not a serviceable part. Do not attempt to replace or service the spring.
•
Always grasp ratchet handle firmly with both hands when adjusting tension.
•
When decreasing spring tension, never attempt to turn ratchet more than 1/4 turn with each push-in motion.
Uncontrolled spinning of the hose reel could cause serious injury if you are hit by the hose or a tool.
•
Never allow reel to spin freely.
•
The reel must be bolted securely in place when making adjustments.
F
IG
. 15
F
IG
. 16
A
B
F
IG
. 17
F
IG
. 18
B
C
