Parts
16
3A2799D
Needle and Seat Kits
The needle and seat are available only in kits that
include items 2a through 2e.
The standard non-diffused needle and seat kit, 237260,
includes all OEM parts and has the number 125
stamped on the needle and seat. It is recommended for
use with mastics, sealers and other high viscosity
materials which have fillers that cannot easily pass
through a diffuser.
The optional needle and seat kit, 237398, has the
number 090 stamped on the needle and seat. This kit
will decrease the maximum flow rate of the gun.
Accessories
17G981 Swivel
7250 psi (50 MPa, 500 bar) Maximum Working Pressure
Connects the gun inlet to the fluid supply hose and
allows easier gun movement and twisting.
17G980 Swivel
7250 psi (50 MPa, 500 bar)) Maximum Working
Pressure
Connects the gun inlet to the fluid supply hose and
allows easier gun movement and twisting. This swivel
has a PTFE seal for improved chemical resistance.
To reduce the risk of component rupture, and
serious injury, including fluid injection, do not exceed
the gun’s 7250 psi (500 bar, 50 MPa) maximum
working pressure or the maximum working pressure
of lowest rated component in the system.
