Luxxor
®
Portable Video Camera User Guide
Phone:
800.536.0790
fax 585.235.6645 gradientlens.com info@gradientlens.com
Luxxor
®
Portable Video Camera User Guide
Phone:
800.536.0790
fax 585.235.6645 gradientlens.com info@gradientlens.com
4
5
Connect the composite video output connector to your monitor’s composite input.
Normally this is an RCA phono jack, usually colored yellow, and labeled Video,
Video In, Composite In, or just Input.
note:
The larger the video screen, the poorer the image resolution will appear at a
particular viewing distance.
The composite video output connector may also be connected to a monitor with an
S-Video Input or BNC Input with an appropriate adapter (sold separately).
Plug the power supply into a 100-240 VAC, 50-60 Hz outlet.
Adapters for a few common power outlets are included.
(UK, EU, etc.)
The Luxxor
®
Portable Camera is powered On when the
cable is connected and the power supply is plugged in.
There is no power switch.
seTuP
seTuP
s-Video (Y/C)
BnC
Y-cable
Composite
Video Out
6-Pin
Power supply
Luxxor
®
Portable Camera
The Luxxor
®
Portable Camera is shipped with
a Y-cable, which allows it to be connected
to any video monitor with a composite input
(NTSC format).
The Y-cable has a 6-pin circular connector
at one end. The other end splits into two: an
RCA phono plug providing composite video
output and a power supply.
Attach the 6-pin connector to the Luxxor
®
Portable
VideoCamera.
