9
It’s important to use the security cable system for additional protection against tipping
over caused by accidentally bumping or moving the easel and your display.
Caution:
Wooden studs run vertically inside the wall. The security clamps
must be mounted to wooden studs at least 1.5 inches wide and spaced 16
inches apart, or the clamps could fall out and result in damage to your display
or cause serious personal injury.
1.
Use a stud finder to locate the edges of the
wooden studs, and mark the center. Use a pencil
to mark drilling holes for the four anchor screws.
2.
Use a 1/8-inch (3.5 mm) wood drill bit to predrill
the marked spots 1.6 inches (40 mm) deep, and
then clean out the debris from the holes.
Attaching the Security Clamps to Wooden Studs
3.
Use the four anchor screws to attach the
security clamps to the wall. Use the Philips
screwdriver to further tighten the anchor
screws, but do not overtighten.
U
4X
S
2X
Stud
Drywall
X
