9
It’s important to use the security cable system for additional protection against tipping over
caused by accidental bumping or movement of the easel and your display.
Caution:
Wooden studs run vertically inside the wall. The security clamps must be mounted
to wooden studs at least 1.5 inches wide and spaced 16 inches apart, or the clamps could fall
out and result in damage to your display or cause serious personal injury.
1.
Use a stud finder to locate the edges of the
wooden studs, and mark the center. Use a
pencil to mark drilling holes for the four
anchor screws.
2.
Use a 1/8-inch (3.5 mm) wood drill bit to
predrill the marked spots 1.6 inches (40 mm)
deep, and then clean out the debris from the
holes.
Attaching the Security Clamps to Wooden Studs
3.
Use the four anchor screws to attach the
security clamps to the wall. Use the Philips
screwdriver to further tighten the anchor
screws, but do not overtighten.
U
4X
S
2X
Stud
Drywall
X
