3 0 6 B
I M I N I
8–11
Battery Charger (Dockside Power Option)
The dockside power must be connected for the charger to work. See
“Dockside Power” on
page 8–10
for instructions. The charger is located in the upper rigging compartment inside the
console. It can be accessed through the upper rigging door on the aft head wall. To activate the
charger, turn the breaker switch located under the aft starboard gunwale to the "on" position.
The charger has a built-in isolator which senses the charging needs of all the batteries and
distributes charge accordingly. At the point that all batteries are nearly fully charged, the
charger will automatically reduce the current being sent to the batteries to a maintenance
level. See the Operation Manual for further information.
T-
TOP
If your boat is equipped with a T-top, do not use the top for storing heavy or large items such
as a raft. The frame for the top is designed for continual use with antennas, radar, and outriggers.
The additional weight caused by larger items such as a raft may cause damage to the frame
structure.
O
UTRIGGERS
The optional outriggers allow you to spread the fishing lines trolled from your boat and
decrease the chance of entanglement.
• Advantages
Advantages of outriggers include: offering bait throughout a larger area behind the boat,
placing bait out of the wake zone, automatic drop back following strikes (which allows for
fish to completely accept bait), and a reduction in unnecessary twisting action characteristic of
artificial bait.
• Instructions
For proper installation and use, refer to the instruction sheet included in your Owner’s Packet.
• Care And Maintenance
- Outriggers should be washed with fresh water, mild soap, and a soft cloth. The poles should
be sprayed down with fresh water. Never use acidic or abrasive cleaners to clean your out-
riggers.
- A periodic waxing of the outriggers is suggested if your boat is frequently exposed to salt
water. The wax will provide a protective coating and seal the pores of the metal. A non-abra-
sive high quality marine or automotive wax is recommended. Clean and wax your outrig-
gers before storage.
- During assembly grease all threads, bolts, and tubes where one section is inserted into
another. Annually disassemble and regrease all applicable surfaces.