Universal Slicer Master Classic C 6 / Classic C 6
26
EN
Pull the carriage completely
closed.
Loosen the blade by turning the
blade screw counter clockwise
with a coin.
Clean the inside of the blade
with a moist cloth.
Replace the blade in the reverse
sequence.
important!
►
Periodically grease the marked
points.
WARNING
►
This process must be performed
with great CAUTION as this is
an extremely sharp object.
carriage
The carriage can be removed from
the machine for better cleaning.
To do that, pull out the carriage
latch on the right side of the car-
riage.
Pull the carriage towards the
back and remove it.
You can now take apart the
GENIO carriage for better clean-
ing.
Remove the slicing support by
placing it vertically and pulling it
out to the top.
You can now also pull off the
flat spring.
Clean all parts with a moist cloth or
under running water.
important!
►
Do not clean the slicing support
in a dishwasher!
Please put a few drops of non-
resinous oil or Vaseline on the car-
riage guide once a month. Wipe
off excess oil/Vaseline with a soft
cotton rag.
Grease
here!