Universal Slicer
Futura F 6 / F 9
20
EN
important!
►
If possible, save the original pack-
ing during the unit's warranty
period to be able to properly pack
the unit in case of a warranty
claim.
Requirements for the in-
stallation location
For safe and flawless operation of
the unit, the place of location must
meet these prerequisites:
■
The unit must be set up on a firm,
flat, level and non-slip base that
has sufficient load bearing capac-
ity.
■
Select the place of location so that
children cannot reach the sharp
blade in the unit.
Electric connection
Follow these instructions about the
electrical connection for safe and
flawless operation of the unit:
■
Before connecting the unit, com-
pare the connection information
(voltage and frequency) on the
rating plate with those of your
electrical network. This informa-
tion must match to avoid damage
to the unit. If in doubt, ask your
electrician.
■
Make sure that the connecting ca-
ble is not damaged. Do not con-
duct it over hot surfaces or sharp
edges.
■
The connector cable must not be
pulled tight.
■
The electrical safety of the unit
is only ensured if it is connected
to a properly installed protec-
tive conductor system. Operation
on a socket without a protec-
tive conductor is prohibited. If in
doubt, have the building instal-
lation checked by an electrician.
The manufacturer does not as-
sume any responsibility for dam-
ages caused by a missing or inter-
rupted protective conductor.
