Universal Slicer
Futura F 6 / F 9
26
EN
important!
The blade case must be in-
serted in such a manner that
the dome on the rear of the
case fits into the motor body
opening.
That releases the blade case lock
again.
Replace the blade in the reverse
sequence.
important!
►
Periodically grease the blade.
WARNING
►
This process must be performed
with great CAUTION as this is an
extremely sharp object.
carriage
The carriage can be removed from
the machine for better cleaning.
To do that, pull out the carriage
latch on the right side of the car-
riage.
Pull the carriage towards the back
and remove it.
You can now take apart the GEN-
IO carriage for better cleaning.
Remove the slicing support by
placing it vertically and pulling it
out to the top.
You can now also pull off the flat
spring.
Clean all parts with a moist cloth or
under running water.
important!
►
Do not clean the slicing sup-
port in a dishwasher!
Please put a few drops of non-res-
inous oil or Vaseline on the carriage
guide once a month. Wipe off ex-
cess oil/Vaseline with a soft cotton
rag.