Manual Universal Slicing Machine H 9 / H 91
EN
14
unpacking
To unpack the unit, proceed as be-
low:
Take the unit out of the carton.
Remove all pieces of the pack-
ing.
Remove any possibly extant la-
bels on the manual universal
slicing machine (do not remove
the rating plate).
Dispose of the pack-
ing
The packing protects the unit from
shipping damage. The packing
materials are selected for their en-
vironmental compatibility and from
disposal aspects so they are recy-
clable.
Returning the packing to the ma-
terials circuit saves raw materials
and reduces the accumulation of
waste. Dispose of packing material
that is no longer needed at a col-
lection point for the »Green Point«
recycling system.
important!
►
If possible, save the original
packing during the unit's
warranty period to be able to
properly pack the unit in case
of a warranty claim.
Requirements for the in-
stallation location
For safe and flawless operation of
the unit, the place of location must
meet these prerequisites:
■
The unit must be set up on a firm,
flat, level, and non-slip base that
has sufficient load bearing capac
-
ity.
■
Select the place of location so that
children cannot reach the sharp
blade in the unit.
Setup and Functioning
Overview
1) Handle
2) Slicing thickness control
3) Stainless steel carriage
4) Serrated blade
5)
Carriage guide profile
1
2
3
4
5
6
