19
DE
EN
FR
NL
IT
ES
DK
less” steel). When cutting up slicing
material which contains a lot of water,
such as tomatoes or cucumbers, lacking
or wrong (too “wet”) cleaning may also
lead to a rust film on the blade surface.
For this reason we recommend to use
a moist cloth, and if necessary some
washing-up liquid, to clean the blade
directly after use. From time to time,
unscrew the blade and clean the unit
on the inside, especially, when “juicy”
slicing material (vegetables, fruit, roasts,
et cetera) have been cut. Treat the blade
with the upmost of care.
CLEANING AND MAINTENANCE
IMPORTANT!
Watch the following safety instruc-
tions before starting to clean the
unit:
• Make sure that the unit is
switched off and is not connected
to the power supply.
• Check whether the stop has been
closed (the blade edge must be
covered).
• Do not use any aggressive or abra-
sive detergents and no solvents.
• Do not scratch off stubborn soil-
ing with hard objects. Do not rinse
the unit with water or immerse in
water.
REMOVAL OF CARRIAGE
• In order to clean the slide better, it
can be removed from the unit.
•
Use a finger to press the carriage
locking mechanism upwards.
• Keep the carriage locking mechanism
pressed and pull the slide towards
yourself.
• Use a moist cloth or running water to
clean all parts.
• Important: Do not clean the slide in a
dishwasher!
• Once a month, add some drops of
resin-free oil or petroleum jelly to the
slideway. Use a soft cotton wool cloth
to remove excessive oil / petroleum
jelly.
REMOVAL OF THE BLADE COVER
PLATE
CAUTION!
Sharp blade!
• Remove the plug from the socket.
• Remove the slide.
• Use the black handle grip to turn the
blade cover plate in the direction of
the arrow upwards until it is vertical
over the motor body. During this
action in the initial position, the snap
point has to be overcome first of all.
• Applying slight pressure, the blade
can be removed.
• Undo the blade by using a coin to
turn the blade screw clockwise.
• Undo the blade from the machine.
CAUTION!
Proceed with caution when wiping
the blade.
• Clean the inside of the blade using a
damp cloth.
• Remove the black wiper ring from the
machine.
• Clean the wiper ring using a damp
cloth.
• Clean the inside of the machine using
a damp cloth.
IMPORTANT!
Never put the blade into the dish-
washer which may affect the sharp-
ness and the corrosion resistance
(salt attacks the blade). Handling the
Summary of Contents for SKS 850
Page 2: ......
