28
DISPOSAL OF THE PACKAGING
The packaging protects the unit against transport damage. The packaging materi-
als are selected according to the environmental compatibility and disposal-related
aspects and can therefore be recycled. The return of packaging into the material
cycle saves raw material and reduces the waste volume. Dispose of the packaging
material no longer needed at collection points for the “Green Dot” recycling system
(in Germany).
IMPORTANT!
If possible, keep the original packaging during the guarantee period of the unit in
order to be able to pack the unit correctly in case of guarantee.
DISPOSAL OF THE UNIT
At the end of its service life, this product cannot be disposed of in normal domestic
waste. The symbol on the product and in the operating instructions point out to
this fact. Reuse the materials according to their marking. With the reuse, recycling
or other forms of recycling of old equipment, you make an important contribution
to the protection of our environment. Please ask your municipal administration for
the disposal point.
REQUIREMENTS ON THE INSTALLATION LOCATION
For safe and fault free operation of the unit, the following requirements of the
installation location have to be met:
•
The unit has to be placed on a solid, flat, horizontal, and non-slipping surface
with a sufficient weight-carrying capacity.
• Make sure that the unit cannot topple over.
• Choose the location in such a way that children cannot reach the blade of the
unit or the supply lines.
• Never use the appliance outdoors, and always keep it in a dry place.
• The unit is not designed for installation in a wall or a built-in cupboard.
• Do not set up the unit in a hot, wet or moist environment.
• The socket has to be easily accessible so that the power cable can be removed
easily in case of emergency.
CAUTION!
Observe the following safety instructions to prevent hazards and material dam-
age:
•
The very sharp blade can cut off body parts. Your fingers are especially at risk.
• For this reason never reach into the space between the stop plate and blade
as long as the stop plate is not completely closed, i.e. set to (below „0“).
