29
DE
EN
FR
NL
IT
ELECTRICAL CONNECTION
For safe and fault-free operation of the unit, the following requirements have to be
met during the electrical connection:
• Before connecting the unit, compare the connecting data (voltage and frequen-
cy) on the type plate with those of your energy network. These details must
correspond so that no damage occurs to the unit. In case of doubt ask your
trained electrician.
• The socket has to be protected at least by a 10 amps circuit breaker.
• Make sure that the power cable is not damaged and is not laid across hot sur-
faces or sharp edges.
• The connecting cable must not be stretched tightly.
• The electric safety of the unit is ensured only when it is connected to a socket
with protective conductor installed correctly. Operation on a socket without
protective conductor is forbidden. If in doubt, let the house installation checked
by a trained electrician. The manufacturer shall not assume responsibility for
damage which has been caused by absent or interrupted protective conductor.
PRIOR TO FIRST USE
Prior to first use, use a moist cloth to wipe the blade of the machine in order to
remove any production residue. See cleaning.
CAUTION!
• Sharp blade!
• Proceed with caution when wiping the blade.
0
1
2
• Set the slicing thickness
to (below “0”).
• Wipe the blade with
the cloth.
