30
INITIAL OPERATION
CAUTION!
Observe the following safety instructions to prevent hazards and material dam-
age:
•
Do not touch the blade with your fingers. This is very sharp and can cause
several injuries.
• The rotating blade can cut off body parts.
•
Your fingers are at risk, especially your thumb.
• Check whether the blade cover plate is attached to the machine properly.
USE OF THE UNIVERSAL CUTTER
IMPORTANT!
• The unit must not be used without the end-piece holder, unless the size and
shape of the slicing material permits.
CAUTION!
• Before inserting the plug into the socket, check whether the switch has been
set to zero / off because otherwise the machine could starting running
directly.
CAUTION!
• Sharp blade!
0
1
2
8
9
10
6
7
5
• Insert the plug into the
socket.
• Place the slicing materi-
al on to the slide.
• Set the requested cut-
ting thickness.
8
9
10
6
7
5
8
9
10
6
7
5
• Switch the unit on
.
• Press the slicing
material lightly to stop.
• Evenly move the slide
towards the blade.
