37
DE
EN
FR
NL
IT
REGULAR GREASING
IMPORTANT!
Grease the machine in regular intervals:
• In case of frequent use, every two to three days.
• When the machine runs for 15 minutes every day, every fortnight.
• Use Graef Plastilube (Art. No. 195) only.
SCREWING ON THE BLADE COVER PLATE
CAUTION!
• Sharp blade!
• Re-insert the blade
cover plate.
• Screw the blade cover
plate really tight using
the pin counter clock-
wise (left-hand thread).
IMPORTANT!
• Before restarting the machine, make sure that the blade cover plate is screwed
on to the blade correctly.
• Switch on the machine only when the blade cover plate has been attached.
• When the blade is run without blade cover plate, it will audibly jerk.
• When the slide is set to the height of the blade, the blade will scratch along
the side of the slide. It runs unstably on its axis and could drop down.
CAUTION!
• Before inserting the plug into the socket, check whether the switch of the
machine has been set to zero / off because otherwise the machine could
starting running directly.