Universal Slicer Master UNA 9
18
EN
■
This device must be used with the
skid and scrap container unless
the size and shape of the cutting
goods does not allow the usage of
the scrap container.
■
When not in use, turn the knob
clockwise beyond the zero point,
so that the stopper plate covers
the blade.
■
Remove the knife prior to every
cleaning.
Start-up
Safety notices
CAUTION
Personal and material damages
may occur during start-up!
Adhere to the following safety
notices to avoid hazards:
►
Packaging materials may not
be used for playing. Danger of
suffocation.
Scope of delivery and trans-
port inspection
As a standard, the device is delivered
with the following components:
●
Universal cutter
●
ø
170 mm serrated stainless steel
cutter
●
aluminium skid
●
scrap container
●
set-up installation
●
instruction manual
important!
►
Inspect the delivery for
completeness and visible
damages.
►
Report an incomplete delive-
ry or damage due to lacking
packaging or transport to
the forwarding agency and
the supplier immediately.
Unpacking
To unpack the device, proceed as
follows:
Take the device out of the box.
Remove all packaging parts.
Remove stickers on the device,
if applicable (do not remove the
type plate).
Disposal of the
packaging
The packaging protects the device
against transport damage. The pa-
ckaging materials are selected ac-
cording to environmentally friendly
and disposal technical aspects and
can be recycled.
Returning the packaging into the
material cycle saves raw materials
and reduces waste. Dispose of no
longer needed packaging materials
at the collecting points for the recyc-
ling system »Grüner Punkt«.
