background image

 
 

4 / 18 

1. 

General notes 

 
1.1 Safety 

As Occupational Health and Safety legislation differs in each state and territory, it is necessary to refer to 
all relevant Occupational Health and Safety legislation, regulations and Australian Standards in your state 
or  territory  at  all  times  during  installation,  assembly,  servicing  and  repair  of  the  Graf  Platin  rainwater 
storage tank systems. 
 
Current statutory regulations and all relevant Australian standards shall be taken into consideration at all 
times. The system and any of its individual parts must be installed by a licensed person. Installation by a 
nonlicensed person may void warranty. 
 
The  entire  system  must  be  shut  down  before  any  maintenance  can  be  undertaken.  Once  any 
maintenance  is  completed  the  tank  must  be  properly  sealed/locked  by  means  provided  with  the  tank  to 
prevent future unauthorized entry. 
 
Graf offers a wide range of accessories which all match each other. The use of non Graf accessories may 
lead to the voiding of warranty and any subsequent claims of liability from any resulting damages. 

 

1.2 Identification of water pipes and outlets 

All  service  water  pipes  and  outlets  leading  from  the  Graf    water  tank  should  be  identified  in  accordance 
with  AS/NZS3500.1:2003-Section  9  and  other  relevant  local  plumbing  regulations  to  avoid  inadvertent 
connection with the drinking water supply. 
 
In  order  to  avoid  the  wrong  connection  between  the  drinking  water  and  the  rain  water  pipe  work,  all 
conduits 

and  tappings  of  rain  water  have  to  be  marked  clearly  with  “RAINWATER”  in  writing  and  be  in 

accordance with local standards. 
 
All non-drinking 

tank water outlets should be clearly marked “RAINWATER” and we recommend they be 

installed  with  vandal  proof  taps.    Depending  on  local  laws,  rain  water  may  or  may  not  be  suitable  for 
human consumption and/or use for personal hygiene. 

 

1.3 Maintenance 

In  the  event  of  work  needing  to  be  carried  out  inside  the  tank,  as  Occupational  Health  and  Safety 
legislation  differs  in  each  state  and  territory,  reference  should  be  made  to confined  spaces  legislation  in 
your state or territory

 

1.4 Site 

As  Occupational  Health  and  Safety  legislation  differs  in  each  state  and  territory,  reference  should  be 
made to excavation and trenching legislation in your state or territory with respect to the use of excavation 
equipment  and  relevant  trenching  legislation  in  reference  to  shoring,  battering  and  depth  specific 
regulations. 

 

1.5 Lifting of Tanks 

Occupational Health and Safety legislation and regulations differ in your state and territory, therefore 
reference should be made to your state or territory legislation when lifting, handling or moving of Graf 
water tanks. 

RAINWATER 

  

  
 
 
 

 

 

Continuous green pipe marker 

for pipe work less

 than 40mm 

diameter used to identify. 

 

Example of typical rainwater  
pipe work rainwater signage.

 

 

Summary of Contents for PLATIN



















Reviews: