GD_6700-6800-INS-LAB-RevA21 • Regency 6700 / 6800 User Manual
16
SWINGAWAY FOOTREST, ELEVATING LEGREST: ADJUST FOOTPLATE EXTENSION LENGTH
Tools required:
7
/
16
" wrench
Footplate
length adjustment
Swingaway
release lever
Swingaway
release lever
Legrest height release lever
Footplate
length adjustment
Calf pad position adjustment
(calf pad height adjustment bracket)
Caster cap
Swingaway footrest
Elevating legrest
Calf pad
Legrest rod and release
1. Use
7
/
16
" wrench to remove through-bolt that holds footplate extension in position in
Footrest / Legrest hanger.
2. Reposition footplate extension in desired position inside hanger.
3. Reinstall through-bolt in appropriate adjustment hole for desired footplate extension length.
Use
7
/
16
" wrench to tighten through-bolt.
4. Follow steps 1-3 to adjust other side's footplate extension length. Ensure both through-bolts are
securely tightened and minimum ground clearance is 2
1
/
2
inches.
WARNING: Ensure footplate extensions are securely installed inside footrest or legrest
before occupying or operating wheelchair.
ELEVATING LEGREST: RAISE LEGREST
WARNING: Avoid potential pinch points while adjusting Elevating Legrest angle.
To raise the Elevating Legrest (adjust the legrest rotation angle):
1. Grasp the legrest near the footplate while holding the Legrest height release lever (shown
above).
2. Rotate the footplate up or down to the desired height.
3. Release the lever.
WARNING: Ensure Legrest is locked in place before occupying or operating wheelchair.
ELEVATING LEGREST: ADJUST CALF PAD POSITION
Calf pad position can be adjusted to five different points for ideal comfort:
1. Rotate the calf pad upward 45°; the calf pad will then be free to move between positions.
2. Slide calf pad to the preferred slot in the calf pad height adjustment bracket (shown above).
3. Rotate calf pad back down to lock the positioning lug into the slot. In addition, calf pads can be
rotated upwards 90° for ease or transfer.
WARNING: Ensure Legrest calf pads are locked in place before occupying or operating
wheelchair.
