Handgrip
Release
Mechanisms
Side
Frame
H-Frame
Reducer Cap
Leg
Wheel
Tip
Adjustable
Leg Attachment
Adjustment Button
(on inside of each
leg attachment)
ADJUSTING THE HEIGHT
NOTE:
Height adjustment should be made to desired height before operation.
Consult with healthcare professional for proper adjustment.
1.
To adjust the height of the leg attachment, depress the adjustment
button and slide upwards or downwards to the desired height.
2.
Adjust the height of the walker by aligning all four leg attachments to
the same position height.
NOTE:
For walker with wheels, ensure the leg marked with a "L" is installed
on the left side of the frame and the "R" is installed on the right side.
ASSEMBLY OF THE WALKER
1.
Remove closed walker from carton.
2.
Grasp one handgrip and pull away from center of walker to unfold frame.
3.
Repeat with other handgrip.
4.
Push handgrips and sides out away from each other until the release
mechanisms lock into place.
CLOSING THE WALKER
1.
Push downward on yellow release button and hold.
2.
Grab one handgrip and push inwards towards center of walker.
3.
Repeat for other handgrip.
