Graham Field LUMEX FR577RGH, Assembly And Operating Instructions Manual

LX_FR577RG-INS-LAB-RevJ21 16

4. 

Heat and Massage MASSAGE Option:

 Press the 

MASSAGE

 switch to start this function. The 

Massage Function Settings are as follows:
a)  Press selector switch for Setting 1: Gentle Lower Back Massage.
b)  Press selector switch AGAIN for Setting 2: Firm Lower Back Massage.
c)  Press selector switch AGAIN for Setting 3: Gentle Upper and Lower Back Massage.
d)  Press selector switch AGAIN for Setting 4: Firm Upper and Lower Back Massage.
e)  Press selector switch AGAIN: Massage function Shuts Off.

5. 

Heat and Massage

 or 

Heat Only HEAT Option

: Press the 

HEAT

 switch to start this function. 

The Heat Function Settings are as follows:
a)  Press selector switch for Setting 1: High Heat, 104°F (40°C), brightest LED.
b)  Press selector switch AGAIN for Setting 2: Medium Heat, 101°F (38.6°C), bright LED.
c)  Press selector switch AGAIN for Setting 3: Low Heat, 100°F (37.8°C), dim LED.
d)  Press selector switch AGAIN: Heat function shuts off.
e)  There is a small red indicator light, which illuminates only during the Heat function, in the 

selector switch. The light’s brightness is determined by the Heat level being used: 

Brightest = High Heat;    

Dimmest = Low Heat.

6.  The Unit automatically shuts off at the following times:

a) 

HEAT FUNCTION:

 After one hour of continuous use at the same level.

b) 

MASSAGE FUNCTION:

 After fifteen minutes of continuous use at the same level.

c)  To restart the Unit, follow previous steps 4 and 5.