LX_FR577RG-INS-LAB-RevJ21 13
Heat and Massage Feature —
Control Module and Transformer Unit
Showing All Connections Correctly Made
Handheld
Pendant
Connector
Heat & Massage
Connectors
Power Cord
Connector
Handheld
Pendant
Connector
Heat Only
Connectors
Power Cord
Connector
Heat Only Feature —
Control Module and Transformer Unit
Showing All Connections Correctly Made
2. The Control Module and Transformer, shown above, are contained in a single unit mounted in
the back compartment. The 8-foot power cord plugs into the wall AC outlet.
Heat and Massage / Heat only Installation Instructions
During recliner shipment, the Heat and Massage / Heat Only cable connections are disconnected.
Info: Model FR577RGH (Heat and Massage) requires two connections; one for the control box
(the following step #4) and the other for the massage motor (the following steps #6 and 7).
Info: Model FR577RGHO (Heat Only) requires one connection for the control box (the following
step #4).
CAUTION: To prevent personal injury and damage to the recliner always obtain assistance
when positioning the recliner as instructed in the following sections.
Heat and Massage Feature —
Control Module and Transformer Unit
Showing All Connections Correctly Made
Handheld
Pendant
Connector
Insert
Back
Massage
Connector
Here
Handheld
Pendant
Connector
Power Cord
Connector
1. Install the back assembly and gas spring on the seat frame with the clevis pins and clips
supplied with the recliner as indicated in your recliner’s Assembly and Operating Manual.
