FR601-INS-LAB-RevC20 13
HEAT AND MASSAGE UNIT SETUP INSTRUCTIONS
(GEN 3 PENDANT-OPERATED)
INSTALLATION AND OPERATING GUIDE FOR CLINICAL CARE RECLINERS WITH
HEAT AND MASSAGE FEATURE (FR601H SERIES)
WARNING: Important! Read and understand these instructions before assembling
or using the Lumex Specialty Healthcare Seating Heat and Massage Unit. If you
do not understand any part of these warnings, cautions or instructions, contact
a healthcare professional for direction in the use of this product. If the Heat and
Massage Unit is not properly assembled, personal injury and damage to the Heat and
Massage Unit could result.
WARNING: The control module and other electronic components contain no
serviceable components. If service is required, the unit must be returned to the
factory for repair. DO NOT attempt to open the electronics or obtain local service;
this will void the warranty and may result in damage to the unit. Consult your
Graham-Field authorized distributor for further information.
WARNING: The recliner seat and back heating elements are wired to operate in
series only. Do not change the system wiring in any way.
WARNING: If components are damaged or missing, contact your Graham-Field
authorized distributor immediately. DO NOT use substitute parts. Use only Lumex
replacement parts. The use of non-Lumex replacement parts could cause personal
injury, property damage, and void the warranty.
WARNING: GF Health Products, Inc. assumes no responsibility for any damage or
injury caused by improper assembly or use of this product.
Description
The Lumex Healthcare Seating Heat and Massage Unit is a low-voltage (12V) Heat and
Massage Unit, controllable by the user and / or caregiver via a handheld pendant. It is
designed to enhance the comfort of the patient / resident during the use of Lumex Clinical
Care Recliners. The Heat and Massage Unit offers three levels of seat and back heat, as well
as a gentle or firm massage function for just the lower back or both lower and upper back.
Connection
The Heat and Massage Unit comes pre-installed in Lumex Clinical Care Recliners with the
Heat and Massage Option (Series FR601H). During recliner shipment, the handheld pendant
and power cord are shipped within the back compartment. The seat cable, disconnected
for shipping, is the only connector that needs to be connected once the back is properly
installed onto the recliner base.
