background image

01.

KEY FEATURES

• 

LED displays.

• 

6 L (1.6 US Gal) glycol tank.

• 

Cools a Grainfather Conical Fermenter to a minimum temperature  

of 4 - 6°C (39 - 43°F)*.

• 

Connect up to four fermenters and ferment each one at a different temperature.

• 

Glycol temperature controller. 

• 

3 pin power connections for fermenters.

• 

The R600a refrigerant used is an environmentally friendly replacement  

for other refrigerants causing no effects to the ozone layer or the  

greenhouse effect.

*Minimum temperature will vary based on external factors such as 

ambient room temperature, the number of fermenters connected and other 

environmental conditions. 

INCLUDES

A  1 x Glycol Chiller
B  1 x wall outlet power cord (with plug based on country of sale)
C  2 x cooling connection couplers
D  2 x 2 m (6.5 ft) hoses
E  1 x glycol funnel
F  1 x silicon tube (8 mm inner diameter for priming pump)
G  1 x 3 L (101 US fl oz) propylene glycol.
H  1 x Conical Coat (2 parts; body & cone jacket)

ALSO SHOWN (not included):
Z  1 x M12 power cord (included with Conical Fermenter)

C

Z

A

B

D

F

G

E

H

Propylene

Glycol

Summary of Contents for Glycol chiller

















Reviews: