10/24
GrainPro® Cocoon™ Cargo Instruction Manual
MA4042TSD1014-3
b.
Starting from the inverted pocket, place
the smaller black running wheel inside the
liner facing upward to engage the zipper
track of the bottom liner.
c.
Place the larger wheel outside the liner
facing upward, to engage the zipper track
of the top liner.
5.5.3.
Using the zipper pull:
a.
Rotate the zipper pull’s plastic handle 180°
toward its pulling loop, forcing the tongues
and grooves of the two zipper tracks
together. Slide the zipper pull around your
Cocoon Cargo.
b.
To make zipping easier, a second person
should pull the top and bottom liners’
zipper tracks close to each other as the
zipper pull is advancing.
c.
Apply the silicon spray to the zipper track
to ensure ease of pulling the zipper pull.
5.5.4.
Completing the zipping process:
a.
Take note of the marks (“arrows”) printed
on both top and bottom sections in pairs.
b.
The markings at the top section are located
on the protective flap. If you reach a pair
that does not match, you can slide the
already zipped tracks by pulling the top
and bottom liners in opposite directions
until the marks meet.
NOTES:
If marks do not align, the two zippers may have been exposed to different temperatures which
might result in elongation of the zipper.
Expose the Cocoon sections under the sun for 30 minutes to remove zipper length difference.
