12/18
GrainPro®
GrainSafe™
Bag-1.0 Instruction Manual
MA4010RLR1009-6
e. To make zipping easier, two persons are
required. One will do the zipping and the
other will hold the other end steadily
making both sections of the zipper in a
straight line to avoid zagging.
8.2.3.
Completing the zipper process:
a.
Align the marks
(“triangles”)
printed on
both tracks located above and below
zipper.
b.
If a pair does not match, slide back the
zipper by pulling the top and bottom part
in an opposite direction until the marks
meet.
8.2.4.
Removing the zipper pull:
c.
When you have zipped the entire length of
the zipper track, take the zipper pull off
the track by rotating the plastic handle
180° away from the zipper pull loop.
d.
Close the last few centimeters of the
zipper track by manually pressing to latch
the
zipper’s
tongue and groove.
8.2.5.
Ensuring a complete hermetic closure:
e.
Make sure to close the zipper correctly to
maintain its gas-tightness.
8.3.
INSTALLATION OF RODENT GUARD (RG)
8.3.1.
For protection against rodent attacks (one set
contains 4 pieces):
a)
One set can be installed on any platform legs
with leg perimeter (round or square) of 22
cm (9'') to 44 cm (17'').
b)
If the diameter of the leg is smaller, the
rodent guard can be cut to fit the legs.
