12/31
GrainPro
®
Carbon Dioxide Analyzer Instruction Manual
MA4068RAD0718 - 2
5.3.3
Set Alarm and Log Time:
a) Present alarm and log time will appear. Alarm value
shall be 99% CO
2
and 1 minute for the log time.
b) To change the alarm value,
use “Up” Key
for
increasing the value (0 to 9) and “Down” Key
to
shift the cursor. Then press “ENT” Key
to
confirm and to move to Log time setting.
c) To change the Log time value,
use “Up” Key for
increasing the value (0 to 9) and “Down” Key
to
shift the cursor. Then press “ENT” Key
to
confirm.
d) To change Date and Time,
use “Up” Key
for
increasing the value (0 to 9) and “Down” Key
to
shift the cursor. Then press “ENT” Key
to
confirm.
NOTE:
If the displayed values are not to be changed, press
“Set” Key
to exit from the current page.
5.4.
Sampling Mode
5.4.1
Press “Up” Key in the Menu page to enter the
sampling mode and the selection of sampling and
purging will appear on the screen.
5.4.2
Select Sampling or Purging as per the
requirement using “Up” Key or “Down” Key .
NOTE:
Make sure that the tube is removed before
confirming.
5.4.3
Press “Enter” Key
for the selected process.
