11/37
GrainPro® Solar Bubble Dryer™50 Instruction Manual
MA4040RAD0914-9
c.
Legs,
Two (2) pieces
2)
Connect the legs on both sides and fix the
horizontal brace supporting the two (2)
legs.
3)
Make sure that the longer legs are located
on the solar panel circuitry. Use bolts and
winged nuts as fastener and the provided
screw driver to tighten.
d.
Horizontal brace,
One (1) piece
e.
Bolts and winged
nuts,
Sixteen (16) pairs
5.2.4.
Exhaust support assembly:
COMPONENT
IMAGE
SEQUENCE OF ASSEMBLY
a.
Support legs,
Two (2) pieces
1)
Assemble the exhaust support frame using
bolts and winged nuts.
2)
Connect to exhaust port of SBD50 with the
pockets provided.
b.
Horizontal brace,
One (1) piece
c.
Bolts and winged
nuts,
Two (2) sets
a
b
c
