37/37
GrainPro® Solar Bubble Dryer™50 Instruction Manual
MA4040RAD0914-9
8.25.
DO I NEED TO STORE THE SBD50 WHEN I’M NOT USING IT?
Yes. When not in use, it’s recommended to clean the SBD50 properly fold the top cover and drying
floor, and store it in a clean area free from rodents and objects that could damage it.
8.26.
WHAT ARE THE MAINTENANCE REQUIREMENTS FOR THE SBD50?
After using, clean the drying floor and inspect it for cuts or holes. If there are holes or cuts, patch
them using the repair tape. Put the SBD50 in its carrying bag and store it out of the reach of rodents,
along with its accessories. Avoid dragging the SBD50 drying floor on rough surfaces.
8.27.
WHAT IS THE USEFUL LIFE SPAN OF THE SBD50?
The SBD50 comes with a 1-year warranty for normal wear and tear. However, the SBD50 must be
used and taken care of according to the instructions in the manual to last several useful years.
9.
WARRANTY CLAUSE
GrainPro® hereby warrants that products sold to Buyers shall be free of defects in workmanship and materials,
for a period as follows, starting from the date of shipment (B/L): One year for the GrainPro® Solar Bubble
Dryer™50 (SBD50).
The warranty liability is limited to replacement of defective products within the warranty period at GrainPro’s
plant in accordance with the provisions specifically and expressly set forth herein.
The Buyer will pay for Products which need to be replaced under warranty, a percentage of the full list price
according to the ratio between the period, which has passed until replacement, and the full warranty period.
The Buyer shall bear shipping costs for shipment of defective Products to GrainPro, and GrainPro shall bear
shipping costs of returning good Products to Buyer.
The Warranty does not cover the cost of any service, work, or material required for the replacement of defective
Products at the site of installation.
GrainPro shall have no obligation under the warranty to replace defective Products or parts thereof if the defect
is a result of any of the following: normal wear and tear; damages occurring after delivery, accidents, acts of
God, or catastrophes, fault or negligence, or improper storage installation, maintenance of the Products.
Replacement costs and shipping charges for Products found not to be under warranty as specified above would
be paid in full by the Buyer before new/refurbished Products are shipped.
Notwithstanding the above, if the Products include main parts or sub-assemblies purchased by GrainPro from
other vendors ("Additional Equipment"), then the period and terms of warranty for Additional Equipment are
limited to the period and terms offered by the vendors of such equipment.
The Buyer agrees that the warranty liabilities of GrainPro shall be and are limited to the express foregoing terms:
THE EXPRESS WARRANTIES AND OBLIGATIONS SET FORTH ABOVE, ARE AND SHALL BE IN LIEU OF ALL OTHER
WARRANTIES AND OBLIGATIONS OF GRAINPRO, and EXPRESSED OR IMPLIED. EXCEPT TO THE EXTENT HEREIN
PROVIDED, GRAINPRO DOES NOT MAKE AND SHALL NOT BE DEEMED TO MAKE ANY WARRANTY WHATSOEVER,
TO ANY END USER OR TO ANY OTHER PERSON OR PARTY, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY
OF MERCHANTABILITY OR OF FITNESS FOR ANY PARTICULAR USE OR PURPOSE. GRAINPRO SHALL NOT BE LIABLE
FOR ANY LOSS OF USE, SALES OR PROFIT OR FOR ANY INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES
CAUSED BY OR SUFFERED AS A RESULT OF THE SALE OR USE OF THE PRODUCTS.
For further information and clarifications, visit our website at www.grainpro.com; email our Technical Support
team: customercare@grainpro.com or call: (+6347) 252-7884.
