Gram Precision C6-10T, Operation Manual

11

5.  Liquid and conducting particle should not be poured into the indicator, 

otherwise the electronic components will be damaged and electric shock 
is likely to happen.

6.  You should cut off power supply of indicator and relevant device before 

you pull –in and out the connecting line of indicator and external device.

•  You must cut off power supply of indicator, before pulling out 

connecting line of load cell.

7.  During operation, if trouble occurs, operator must pull off the power 

supply plug immediately, and user should return this indicator to our 
company for repair. 
Non-weighing manufacturer should not repair it, or by your-self, 
otherwise further destruction may happen.

8.  The storage is not granted the free repair guarantee, because it is easily 

exhausted products.
•  In order to prolong using life, please charge the cell fully before using 

it. If you don’t use the indicator for a long time, you must charge the 
cell every two month and for eight hours/each charging time.

•  Moving or installation must be carefully taken and must avoid strong 

vibration, impact and bump in order to protect the storage cell from 
being damaged.

9.  From invoice date, the indicator has a one-year free repair period. If any 

non-artificially obstacle about the indicator happens under correct using 
conditions within this period. The user is allowed to send the product 
with its guarantee card (of the correct number).

Back to our corporation for free repair. The indicator shouldn’t be taken 
apart, otherwise free guarantee will be cancelled.