10
Number of pieces setup
Use the 0-9 numbers keys to input the desired sample quantity, when the
display weights shows the weight, press the
key, the piece weight
window shows the unit weight and total count window displays the total
pieces number.
Limits function
Place the items to be counted on the weighing pan, use the 0-9 number keys
to introduce the number of pieces loaded and press the
key. Once the
balance memorizes the sample, place the maximum weight on the pan (high
limit value), press the
key to confirm the high limit value.
Remove the weight from the pan, from this moment, the balance will beep and
will show the message “HI” when the load will excess the preset high value.
FUNCTIONS SETUP
Press the
and
keys to enter the parameters.
To access the function configuration:
Use the key to move to the right.
Use the key to move to the left.
Use the key to enter the desired configuration mode.
UF-1 Internal Value / Display Battery Voltage
1. Press the
key to display the following internal values:
• The Weight / Peso display shows internal value of the span.
