16
UF-7 ADC Update Rate
SPEEd 0
Low speed 7.5 hz.
SPEEd 1
Standard speed 15 hz.
SPEEd 2
High speed 30 hz.
Factory speed: SPEEd 0
1. Press the
key to access programming functions.
2. Use 0 ~ 2 keys to enter ADC speed.
3. Press the
key to confirm.
4. To exit and return back to weighing mode, press the
key.
UF-8 Display Condition at Zero
ZP 0 Off.
ZP 1
One division not to display at zero.
ZP 2 Two division not to display at zero.
ZP 3 Three division not to display at zero.
ZP 4 Four division not to display at zero.
ZP 5
Five division not to display at zero.
Factory default: ZP 1
1. Press the
key to access programming functions.
2. Use 0 ~ 5 keys to enter condition at zero.
3. Press the
key to confirm.
4. To exit and return back to weighing mode, press the
key.
