10
HOW TO CLEAR WEIGHT ACCUMULATIONS
1. Press the key and all the weight accumulations which were carried out will
be erased.
HOW TO ENTER THE SAMPLE FOR PIECE COUNTING
1. Press the key.
2. Use the numeric keys from 0 to 9 to enter desired sample quantity.
3. Place the same amount of pieces as sample pieces entered.
4. Press the key.
5. The scale will be ready to count.
6. To exit counting mode, press the key.
•
The screen will display the message
U.--
when the sample unit weight is less
than 0.2 d
•
The screen will display the message
S. --
when the sample weight is less than
20 d.
•
The screen will display the message
U.--S.--
if the unit weight and sample
weigh are less than 0.2 and 20 d
PIECE COUNTING FUNCTION
1. Press the key to activate counting mode.
2. If the scale has no previous sample count saved, it will display
U.—
for 2 seconds
and will activate counting functions. In this moment, please proceed to enter the
sample as it is described in the previous chapter.
STANDARD CALIBRATIONS
Press the and the key in weighing mode to start Standard
Calibrations.
ECF-1
Weight Calibration (Zero and Span)
ECF-2
Zero Calibration
ECF-3
Span Calibration
Summary of Contents for CM-15 Series
Page 2: ...2 REV 1A11M06...
Page 3: ......
