Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.3.2 Seat cushion cover – removal and installation
(seat with climate control system)
Page 4 of 6
REMOVAL INSTALLATION
TABLE OF CONTENTS
9
ATTENTION
Damage!
The seat cushion cover (1) is kept
under tension with two lugs (7) at tie
straps (6) in the seat pan area at the
back. When removing the seat
cushion cover (1), make sure that the
tie straps (6) do not tear.
Pull off the seat cushion cover (1) at
the foam plastic part (2).
10 Place the two lugs (7) vertical and
pull out in upward direction through
the slits in the foam plastic part (2).
11 Remove the seat cushion cover (1)
at the foam plastic part (2).
Installation note:
Ensure that the ventilation cushion
(3) has been placed correctly in the
foam plastic part (2).
A-A
A
11
10
8
5
4
2
7
7
6
6
3
1
8
5
5
4
4
11
1
2
A
2541
9
7
2
7
1
8
5
5
5