Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.26 Backrest cover and seat belt – removal and installation
Page 7 of 9
REMOVAL / INSTALLATION
TABLE OF CONTENTS
10 Unscrew the serrated washer head
screw (18), and put aside the belt
bracket (17) with the belt guide (21).
Note:
For seats with climate control
system the microphone support (24)
must be removed.
Installation notes:
•
Replace the serrated washer head
screw (18), 25 Nm.
•
The hook (arrow) at the belt
bracket (17) must engage into the
square hole at the backrest (23).
•
For seats with climate control
system the belt bracket (17) must be
screwed on together with the
microphone support (24).
11 Unscrew the three rounded head
screws (16) at the belt guide (15).
Installation note:
Rounded head screw (16), 2 Nm.
18
18
17
19
21
6
23
16
16 16
17
19
21
6
24
22
17
20
21
19
6
15
2552
