Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.54 Cable harness for microphone – removal and installation
(seat with climate control system)
Page 3 of 5
REMOVAL / INSTALLATION
TABLE OF CONTENTS
Removal and installation
6 Disconnect the electrical connection
(O) between microphone cable (1)
and microphone contact cable (15).
7 Mark the points where the microphone
cable (1) is attached to the backrest
heater (14) and to the cable harness
for the backrest (10) by means of two
cable ties (13) and remove the cable
ties (13).
8 Mark the points where the microphone
cable (1), the cable harness for the
backrest (10) and the electrical
connection (M) are fastened to the
backrest frame (9) with cable ties (11)
and remove the cable ties (11).
Installation note:
The excess length of the backrest fan
cable (12) is tied back in loops with
the cable tie (11).
1
4
5
2
3
6
13
14
1
9
10
13
7
6
8
10
1
12
11
10
M
9
1
4
2
3
1
2
3
O
O
15
1
5
2551
