Repair Manual MSG 90.6PG Commercial Vehicles, Omnibuses – November 2017
Material no. 1153450_c
3.3.1 Seat cushion cover – removal and installation
Page 3 of 3
REMOVAL INSTALLATION
TABLE OF CONTENTS
Installation
1 Push new clamps (6) – 16 pcs. –
at the marked locations onto the seat
plate (5).
2 Guide the seat cushion heater cable
(3) into the seat plate (5) and evenly
install the seat cushion cover (1) onto
the foam part (2) starting from the
back to the front.
3 Turn back the edge of the seat
cushion cover (1) along the slinging
strap and evenly push it into the
clamps (6) from the back to the front
(A – A) using a stopping knife. While
doing so, compress the foam plastic
part (2) to release the tension in the
seat cushion cover (1).
4 Install the seat cushion and lever for
seat angle and seat depth adjustment
(Chapter 3.2).
5 Install the seat cushion (Chapter 3.1).
1
2
5
3
A-A
A
5
3
1
1
6
2
4
A
5
513
